function index

Every function.One page.

The complete design-side inventory of ShapeStudio Pro — every tool from the first spline to the printed spec sheet, every format in and out. Nothing hidden behind a brochure. If it is in the app, it is on this page.

//The CNC workbench is a world of its own — it has a dedicated page.the cnc workbench →
18
function areas
136
documented functions
1,442
boards in the curve library
10
plan & spec tabs
01/spline_design

The spline studio

Five linked Bézier views — outline, profile, thickness, slices, and a rotatable multi-curve wireframe — all editing the same parametric model. There is no “export step” and no baked geometry: every point you see is a live control point.

shapestudio — design zoom

Control-point editing

Drag points and tangent handles directly; double-click a curve to insert a point, delete what you do not need. Arrow-key nudging with Shift ×10 and Ctrl ×0.1 multipliers, and a per-pane step selector from 0.1 to 5 cm.

Seven tangent types

Continuous, C2 curvature-continuous, Angular, Vertical, Horizontal, Fixed-angle and Passive — color-coded on canvas with single-key hotkeys (C / C2 / A / V / H / F). Switching type never silently reshapes the curve.

  • C
  • C2
  • A
  • V
  • H
  • F

Point roles & slices

Apex, Rail and Center roles with on-canvas role dots; per-slice point-count consistency keeps stations comparable across the board.

Multi-select & alignment

Ctrl-click and lasso marquee across panes, then Align X/Y (min · avg · max), Space Evenly horizontally or vertically, multi-delete, or shift a whole selection by exact numbers.

Design overlays

Guidelines, wide point, center of gravity, curvature combs, multi-view, a pitch-aware buoyancy line, and stance-width foot ellipses — the shaper’s marks, live on the canvas.

Design check (E key)

One key sweeps the model and marks superposed points in green and kinks in red, with a defect count in the status badge. Find the unfair spot before the machine does.

Section check

A live cross-section follows the mouse through any 2D view — read the foil at any station without switching modes.

Swallow-notch & stringer curves

The V-notch between swallow lobes is its own editable Bézier, and the stringer centerline is editable in place from the outline view — blended activation-neutrally into the profile.

Rail & apex curve engine

Extract and re-apply rail and apex definition curves longitudinally; a side-view curves panel picks the edit target when points overlap.

Relative point binding

Bind any control point to another curve — outline, rail, apex or stringer — with a stored offset. Move the reference and the bound point follows. (The Shape3D “Rel.” system, kept honest.)

Undo history & curve clipboard

Board-wide undo/redo with a long-press history dropdown to jump steps; copy/paste the active curve and save or load curves as files to reuse across boards.

Guidelines & the measurement wizard

Draggable ruler guides with a one-click auto-fit through their intersections — or type a measurement table (widths, thicknesses, rockers per station) and let the app fit the board to it.

Dimensional constraints

Lock target width, thickness or rocker values at chosen positions with tolerance bands; violations flag live as curves drift.

  • studio

Master Scale panel

Live length/width/thickness/rockers and volume, a volume-distribution sparkline, surface area, aspect ratio, prismatic coefficient, effective length and nose/tail curvature radii — plus one-click launchers to the rocker jig table and volume wizard.

02/smart_editing

Smart editing & generators

One-click operations for the moves shapers make every day — each a real parametric edit you can still undo, inspect and keep tuning by hand afterwards.

Quick Shape

The smart-functions shelf: set width, thickness, rocker, vee/concave or rail at any station — anchored from tail or nose — with live previews before you commit.

Rail & shoulder presets

Eight rail presets, five edge/tuck combinations and four apex ratios, previewed against the live cross-section before applying.

  • 8 rails
  • 5 tucks
  • 4 apex ratios

Tail shapes & wings

Eleven tail presets — square, squash, round, round-pin, pin, diamond, wings, swallow, fish, moon, bat — with notch and wing fields.

  • 11 presets

Nose, concave & deck features

Pointed, round or square noses; spoon concave; recessed deck; beak nose — all as editable parametric features, not painted-on hacks.

Channels & grip arrays

Two, four or six channels, belly, venturi or rail grabs — straight, tilted or curved paths with length and depth. Or start from the layer presets and sculpt your own.

  • 2 · 4 · 6 channels

Hardware in one click

Add fin plugs in nine layouts (single through 4+1 and foil tracks), the leash plug, and foot-strap inserts — sized and placed automatically.

  • 9 fin layouts

Volume Wizard

A bisection solver that hits a target volume within 50 mL, scaling by your priority — thickness, width, length, or proportionally.

  • ±50 mL

Volume Lock

Toggle it on and sculpt freely: one exact compensating scale restores the locked volume about a second after your edit settles — a single undo step, with live green grading while you are inside 0.5%.

Size Run generator

Turn one proven board into its ±2 / ±4 / ±6 inch family using shaper’s-rule sub-linear scaling — width, thickness and rocker each growing at their own proven exponents. Every member saved as its own file.

Engineering actions

Dimension morphing (total scale or mid-section stretch), add/remove uniform thickness, reverse nose ↔ tail, and a factory-export shelf.

Whole-board actions

Level Board, Natural Level, Flatten Stringer (bottom or deck), and Reverse Left/Right mirroring for asymmetrics.

Rail Master & Fair Curve

A rail-focused editor with baseline-vs-current deltas graded green under 1%; and a one-click fair-curve solver for the curve that got away.

03/curve_library

A thousand boards of shape knowledge

1,442 real boards from the stock corpus, stored as pure shape — rocker, foil, outline and cross-sections with size stripped out — so any curve fits any board you are drawing.

Sort by likeness

“Like this board” ranks the whole library against your current shape; or sort by nose/tail rocker, thickest point, foil balance, wide point, nose and tail width, tail block, or boxy ↔ round.

Character filters & search

Filter by character, search by name, and compare candidates in a table before you commit.

Apply curves

Apply any library profile, outline or slice to your board — the fit is real, not a stretched screenshot.

Your shop’s curves

Capture curves from your own boards back into the library, import curve folders, and keep a persistent house style that follows you between machines.

04/3d_viewport

The 3D viewport

A watertight lofted surface rebuilt on every edit, meshed in a worker so the UI never freezes — the same surface the exporter and the toolpath engine read. What you orbit is what exists.

shapestudio — 3dview zoom

Eight color modes

Flat, Resin, a thickness heat-map with legend, contour Bands, Isobar, radial and longitudinal curvature (with sensitivity), and Zebra stripes for reflection-line fairness checks.

  • thickness
  • bands
  • curvature ×2
  • zebra

Camera & layout

Orbit, pan and zoom with fit-to-view; Top / Side / Nose / Tail / Flip presets on hotkeys, split view, and a draggable 3D controls drawer.

Structure overlays

Wireframe, the design-curve cage, a topology matrix, blueprint grid, wood stringer, and per-system fin boxes rendered in place.

Materials & lighting

EPS, PU and XPS foams; balsa, red cedar, paulownia and bamboo with procedural grain and an intensity slider. Ambient and flashlight intensity, shadows, light tint, and a raking-light angle slider that makes channels and concaves pop.

Female Mold Mode

Invert the board into a production mold — bottom or deck cavity, flange width, block depth and draft angle, with the parting line following the rail apex.

Exploded construction view

The board lifts apart into its laminate stack — foam, stringer, every glass ply, hot coat, gloss, patches, boxes and fins — with name plates and leader lines, driven by the board’s real materials. Exportable as a self-contained HTML shareable.

Cut Preview — “Shaping Bay”

A matte-foam render with tool marks and bay lights that shows the board as the machine will leave it.

Measurement overlays

Center crosshair with camera distance, live 3D cursor readout, translucent slice planes on hover, and a volume-distribution overlay in side view.

Marketing shots

Record a turntable WebM — 3 to 20 seconds, vertical or long-axis rotisserie — or a hero PNG, exactly as composed on screen.

  • webm
  • png
05/layers_&_contours

Layers: contours as real displacement

Channels, concaves, vee, step decks and beaks are displacement layers on the hull — combined by blend mode and blended with smoothstep at adaptive margins, so shallow channels stay crisp while deep cuts feather cleanly into the rail.

Six layer types

Center, Twin, Constant Depth, Side Cut, Vertical Cut and Free — picked from a shape-first dialog of glyphs, not a spec sheet.

Blend modes & sides

Add, Subtract or Intersect; per-layer side selection (both, left, right) for asymmetrics; Homothetic, Angular-Z or Hybrid interpolation.

Eight option flags

Smooth Edge, Symmetric Nose/Tail, Map on Extended Bottom, Bound Always, Limit to Apex, Structure Mode, Centered X and Opposite Side Mapping — the fine print that makes contours behave at the tips.

Contour presets

Two-line channels, spoon concave, step deck and swallow tail ship as one-click presets from the Board menu; twin and single channels auto-taper their width with the planform.

Beak nose & deck bevel

A graded deck-stringer bevel edited from the outline view and rendered through the same remap the cutter uses.

The Layer Bank

A bundled preset library plus your persistent user bank — save any tuned layer per row, duplicate, group, color-code, and export password-protected layers to share or sell. Imports from .ssp, .s3d and .s3dx.

Physical layers

Per-layer density and modulus feed the weight calculator and flex analysis — a recessed cockpit or a cedar inlay changes the numbers like it changes the board.

06/resin_&_finish

The Resin Design Studio

The cosmetic finish is part of the design. Five tabs drive a live preview on the real surface — and every choice embeds in the board file, ready for the customer package.

Tint

Deck and bottom colors with opacity — from a whisper of pigment to a full opaque lamination.

Swirl

Procedural resin marble with six quick presets — Lava, Aurora, Tropical, Ocean, Poison, Vintage — or two to six custom colors, with intensity, scale and a randomize seed per surface.

  • 6 presets
  • 2–6 colors

Airbrush

Up to four fade layers on nose, tail or bands, each with reach and softness controls.

Pins & finish

Rail or stringer pinlines with width, offset and opacity — then gloss or matte.

Textures

Map real photographs onto the surface — wood, carbon, fiberglass — with tint modulation by the swirl’s luminance, rail wrap, and per-slot scale from 0.5× to 10×. Images embed in the board file.

Patches

Reinforcement and traction patches in six materials — carbon through EVA deck pads — with tints, fades, airbrush bands, kick and shaped edges. The full render story is the next section.

Logos & branding

Raster decals with position, scale and rotation, on deck or bottom — “Set as Default” stamps your branding on every new board.

Rail wrap & 3D pinlines

Cloth rail wraps — E/S/K glass, Volan, carbon, Texalium, Kevlar or solid color — with wrap depth and a feathered-to-sharp cut-lap edge, plus two independent 3D pinlines.

07/realistic_renders

Renders that pass for photos

The render stack that sells the board before it exists. Deck pads with true molded tread, tints and fades with real airbrush stripes, materials draped over the actual hull — deck crown, rails and all — so what you send the customer looks like what left the shop.

Deck pads from a real mold shop

The EVA traction pad is modeled the way pads are made: ~1.25 cm diamond tread with per-diamond height jitter and grooves, split into 10 cm panels with visible seams — one texture tile is one pad panel. Tint it any color; the tread keeps reading.

  • ~1.25 cm tread
  • panel seams

Pad kick

Wedge the pad’s rear edge up to 4 cm off the deck — closing with a hard back wall and solid side flanks, like foam that came out of a mold. Deck face only.

  • 0–4 cm

Tint or fade, your call

One color swatch is a solid tint. Add stops and it becomes a gradient through all of them — laid along the length (tail → nose) or across the width (stringer → rail), with the transition center and spread under your control.

Airbrush bands

Quantize any fade into two to twelve hard stripes for the airbrush look, or leave it smooth for a continuous resin blend.

  • 2–12 bands

Draped, not stickered

Patches wrap the real hull — deck crown, rail tuck, closed tips — like cloth laid wet on the blank, instead of floating flat. They render in both Flat and Resin color modes.

Edge silhouettes

Straight, round or pointed ends with signed depth up to 30 cm — bulge the edge outward or cut a notch into it. Pointed at both ends reads as the classic diamond patch.

  • ±30 cm

Width & rail gap

Set lateral coverage as a percentage of half-width at each station, or pull the outer edge in from the rail by centimeters — it follows the outline curve; whichever limit is nearer wins.

  • 0–8 cm rail gap

The material shelf

Carbon 6 and 12 oz, fiberglass 4 and 6 oz, EVA, Innegra and bamboo cloth — or your own photo as a custom texture, tiled at any scale.

  • 6 materials
  • custom

Presets that re-proportion

Seven presets — from tail carbon through the fade traction pad — plus Save as Preset for your own. Applied to a different board, positions and edge depths re-proportion to the new length while rail gap, kick and panel size stay physically true.

The full showroom shot

Lay pads and fades over a Resin Design Studio swirl, pinlines on the rails, gloss to finish — then record the viewport’s turntable. The customer sees the board before the blank is ordered.

08/fins_&_hardware

Fins, plugs and hardware

Fins are first-class parametric objects: Bézier planforms with the same tangent system as the board, a real foil section through the blade, and a dedicated CNC workbench for cutting them.

Layout Wizard

Single, twin, thruster, quad and 2+1 presets that size themselves to the current board; per-plug system dropdowns cover FCS II, FCS Original, FCS Fusion, Futures, US Box, Tuttle, Deep Tuttle and PowerBox.

  • 8 systems

Placement control

Distances from tail, center and rail; toe-in and cant with an on-canvas drag handle (±20°); mirror symmetry; arrow-key nudging; and a red warning the moment a box overhangs the rail.

McKee Convergence

The classic quad reference: four plugs whose toe lines converge 12 inches ahead of the tail, toe computed from the board’s actual width.

Deck hardware

Leash plug, foot-strap inserts (2 or 4 M6, scaled to length), vents and handles — with color presets and a custom picker.

The Fin Designer

A two-pane spline editor with live 3D preview; six presets from a standard thruster side fin through modern keels and longboard pivots to 72 cm windsurf fins.

  • 6 presets
  • 72 cm

3D Reference Trace

Import any STL / OBJ / PLY / 3MF fin as a ghost, then fit a spline to it — slice-height and leading-edge alignment sliders, snap-to-outline, and a fit you can keep editing.

Foil section editing

Symmetric or flat-sided foils with glass-layer contour rings; per-station thickness and taper on the section editor; measurement bars for base, depth and chord up the span.

Fin metrics

Area, aspect ratio, sweep and balance readouts; a curvature comb; ghost-outline comparison; draggable guidelines with depth targets and rake limits; and defect markers where a mesh or toolpath assumption is shaky.

Apply to Board

Push a designed fin’s base, height, thickness and box system onto every plug it fits — then save fins as their own .ssp files and export STL.

Box templates & molds

DXF templates, STL molds and printable drilling guides with annotations and scale for every supported box system.

09/hollow_wood

The hollow-wood shop

A complete HWS workflow: an egg-crate frame, developed skins, solid tips — nested, labeled and printed at 1:1 for the saw and the router table.

shapestudio — hws zoom

Rib editor

One rib per station in a filmstrip; drag cutouts — vent, lighten, hand-hole, drain or custom — to move them, grab a handle to resize, delete what you do not need. Narrow tip ribs flag invalid cutouts live in red.

Broadcast

Copy a cutout pattern to every rib or every second rib in one move — lightening holes that took an afternoon now take a click.

3D frame preview

The translucent skin over the real egg-crate frame with solid nose and tail blocks, every cutout punched through as a true hole. Click a rib in 3D to jump the editor there.

Construction parameters

Skin and frame thickness, rib spacing, tip offset and rail width; automatic lightening and vent holes at a set diameter; bead-and-cove stacked rail profile; and truss lightening for ribs and stringer.

Nesting & export

Frame DXF (stringer, ribs, blocks), developed deck and bottom skin DXFs, and sheet-size nesting to DXF or SVG with per-part labels and grain arrows — plus sheet count and material utilization before you cut, and paginated full-scale print/PDF.

10/ai_consultant

The AI consultant

A real assistant, wired to real operations. Your request is translated into calls to a deterministic operation library — the AI never touches raw geometry, so nothing it does can break a board.

Bring your own model

Claude, OpenAI, Gemini, Grok, or any of 300+ models through OpenRouter — or a fully local Ollama / LM Studio setup. API key and test connection live in Preferences.

  • 5 providers
  • local llm

Deterministic operations

Free-form requests (“a touch more nose rocker, keep the volume”) map onto the same vetted operations you could click yourself. Every run reports “Applied N changes” with per-message undo, and notes anything it skipped and why.

Design skills library

Curated craft knowledge — volume and rocker rules, pro-model build behavior — auto-matched to your request and injected provider-agnostically, so the advice does not depend on the model’s surfing trivia.

Self-verification

After operations apply, the board is re-measured; hard problems are fed back for automatic correction, bounded to a few passes. A clean design still costs exactly one call.

The rider feedback loop

From Customers & Orders, “Ask the AI” sends a structured brief — dims, volume, fin setup, dated rider feedback — and gets reversible change proposals. Copy the brief for any external model.

Magic-board cloning

Component Import fits your board to a reference and reports per-curve RMS (green under 0.15 cm) with an honest volume comparison — best-fit refined before it reports.

11/measurement_&_physics

Numbers you can shape to

Hydrostatics solved off-thread, flex from the real laminate schedule, weight from the real materials — every readout live while you drag.

Live volume

Liters update on every drag in the status bar, pulsing when a change exceeds 5 mL — with the volume wizard one click away.

Hydrostatics

The GZ righting-arm curve across 0–90° of heel with roll-recovery-energy shading, metacentric height, center of buoyancy, waterplane area and wetted area — with a built-in stability guide.

Volume distribution & drag

Per-station volume with the center-of-buoyancy marker and hover values; projected surface per station; and a KAPER drag decomposition — viscous vs wave — with the crossover marked.

Flex analysis

Deflection from the foam, stringer and glass schedule (Euler-Bernoulli), fed by the real core modulus from the materials panel. Charted on its own plan tab.

Weight calculator

What-if foam presets (EPS super-light to standard, PU light to standard, custom density) across five glass schedules and epoxy or polyester resin — volume, foam, stringer, glass and resin, hardware, total; kilograms and pounds.

  • kg · lbs

Thickness inspector

A station table with a heat-map overlay on the model — minimum, maximum and variation at a glance.

Rocker jig table

Printable tail and nose station tables in imperial (0/3/6/12/18/24″) or metric spacings, measured straight-line or along the developed stringer — copy as TSV for the jig.

Health checks

Cusps, sudden thickness drops and non-monotonic rail lines flagged with pointers straight to the tool that fixes them.

12/timeline_&_compare

History, ghosts and honest diffs

Every board keeps its own archaeological record — snapshots that survive restarts, ghost overlays of the boards it learned from, and curve diffs that quantify exactly what changed.

The persistent Timeline

Automatic snapshots on open, save, and about ten seconds after an edit settles — fifty per board, keyed to the file, still there after a restart. Revert to any entry; clear the trail when you ship.

  • 50 snapshots

Quantitative curve diff

Per-station signed deltas for outline, bottom rocker, deck line and thickness against any ghost or timeline version. Tolerance bands cycle ±0.3 / ±0.1 / ±1 cm, with a worst-point marker, max deviation and RMS — a green check when you are inside the band.

Ghost boards

Load .s3d, .s3dx and .brd files as translucent color-coded overlays — in 3D and traced behind the outline in 2D — with a comparison metrics table (dims, rockers, volume, colored diffs). Save-and-reload keeps your reference one keystroke away.

Compare dialog

Side-by-side canvases of the active board and any loaded ghosts, selectable per board.

Ghost images

Load an outline or rocker photo as a traced background — scaled to board length, with opacity and flip controls.

13/import_&_digitize

Boards in, however you have them

Read the formats that exist in the wild, trace the ones that only exist on paper — every import lands as fully editable curves, never a frozen mesh.

shapestudio — digitize.txt
Native
.ssp
Shape3D
.s3d · .s3dx
BoardCAD
.brd
Rhino & others
.3dm · .kkl · board XML
Meshes
STL · OBJ · PLY · 3MF

Photo / template digitizer

Two clicks calibrate scale off a photo (the marks can sit on a ruler), Otsu auto-threshold with light-on-dark polarity, small tilts de-rotated — then a spline fit at 0.05–1.5 cm tolerance with point count, max error and RMS before it applies to outline or rocker as one undoable step.

Scan & Digitise wizard

Three roads back to editable curves: probe G-code generation for LinuxCNC, Mach3, MASSO and GRBL; point-cloud import from probe logs; and full 3D mesh scan-to-board — deck plus optional flip-merged bottom, with 2–20 cross-section slices and apex/rail points.

Component Import

Patch a single curve — outline, deck, bottom or thickness — in from meshes or CSV, with unit selection and a clone-fit report. Non-board meshes are rejected with their dignity intact.

Image reference overlays

Top and side background images at controllable opacity (35% default), width scaling, offsets and flips — draw over the reference like on a lightbox.

Shape3D semantics honored

Protection tiers, machine settings, masts and definition side-curves carry over from .s3d/.s3dx files — an import, not a rescue.

14/export_&_share

Every way out of the app

From machine-ready meshes to a shareable HTML turntable — the same surface the toolpaths read, in every format your workflow wants.

shapestudio — export.txt
Meshes
STL · OBJ
CAD surface
IGES NURBS
Cut sheets
DXF · SVG
Shareables
HTML · VRML · XML · CSV
Images & video
PNG · WebM

STL & OBJ meshes

Low, medium or high density; layers included or not; units and vertex merging — and a watertightness gate that refuses to export a leaking mesh.

IGES NURBS surface

The surface as real NURBS for downstream CAD and CAM, with precision control.

DXF & SVG cut data

Outline, profile, sections and thickness to DXF with spacing and scale controls; developed templates to SVG — including a dedicated Shaper Origin SVG with 96 dpi contours and plug pockets.

Interactive HTML viewer

A self-contained 3D board viewer — one file, no server, send it to the rider.

Customer package

Board, construction and specification bundled as one shareable deliverable.

Production data

Production sheet CSV, dimensions CSV, full XML board plan with every spline — and PNG captures of any 2D view, plus turntable WebM from the viewport.

15/plan_&_spec

The plan room

Ten tabs that turn the live model into paper — drawings, job cards, marking tables and templates that a shaper or a factory can build from without opening the file.

Board Chart

A CAD-style orthographic drawing in 2D, 2D+3D or 3D layout with live orbit — customer name and note header, nine display toggles, standard / constant-spacing / custom stations, paper formats, and print, PNG or CSV out.

Board Spec

The one-page factory job card: dimensions, glassing, hardware, materials, rider profile and notes.

Glass Schedule

The layup recipe with five presets (Standard Performance to Carbon Performance), one to six plies per row, patches, automatic resin at 55% of glass weight, a finished-weight estimate and CSV export.

  • 5 presets

Marks

The hand-marking table — X, deviation along stringer, width, carré, hull-Z, deck-Z, thickness — in standard imperial stations or constant 3–40 station spacing. CSV.

Full Scale

1:1 tiled prints of outline, rocker profile, any slice, or the spin template on A4/Letter with corner registration marks, at 100/50/25% scale.

The Spin Template

The lens-strip tracing template — tail half of the top rail, nose half of the bottom rail, tip to apex — tiled at 100% with glue lines, alignment marks, edge labels, wide-point dots and a 50 mm calibration bar. SVG or DXF.

Analysis tabs

Distribution, Hydrostatics, Flex, Health and Thickness — the physics panels, formatted for print.

16/shop_&_orders

The front counter and the back room

A local CRM built for shaping businesses — customers, orders with snapshotted geometry, a rider fitter for the shop floor, and a material finder that prices the whole build.

Customers & Orders

A new order snapshots the complete shape — curves, layers, materials, CNC settings — so “Open board” in six months reloads the exact geometry. A designed → shaping → glassing → done → delivered pipeline, with dated rider feedback accumulating on the shape actually surfed. Local, atomic, no accounts.

Rider Fitter

Weight, height, skill and wave power (1–10) produce a deterministic target volume and a ±6 cm length band, then rank the stock library best-first with color-graded accuracy. Load a candidate and tune it with Volume Lock.

Factory Order dialog

The fillable customer and order card with resin specs, logo assets and a factory workflow checklist — the brief a production partner needs.

Material Finder

The bill of materials for the open board: the smallest fitting commercial blank, cloth yardage from the schedule at 30″ width, a resin kit sized from wet-out weight, fin-box hardware — with US/EU/AU supplier regions, quote cards, total sourced cost and a best-deal badge.

Core materials

Foam presets through Divinycell sandwich cores with density and Young’s modulus; stringer layouts from single to five, parabolic rails and triangular V, with wood type and thickness; deck/bottom glass schedule text; resin type — feeding a live weight breakdown.

17/files_&_protection

Files that respect their maker

A native format that keeps everything, encryption that keeps it yours, and protection tiers that let a file travel without giving itself away.

The File Selector

Browse a folder of boards by their curves — every file previewed on a canvas before you open it, dimensions and volume read straight from the data, sortable by length, width, thickness, volume or date, with search, rename, move, protect and CSV export.

Native .ssp format

One file preserves curves, layers, fins, hardware, materials, cosmetic finish and CNC settings — with open-recent, save-as and a dirty dot that never lies.

AES-256 encryption

Optional password on save, prompt on open, no recovery by design. If it could be cracked by asking, it would not be protection.

Protection tiers

No Modifications; Resize Only; Cutting Path Only; No Cutting Path with named exceptions; and No Reading After an expiry date. Respected on parse by every ShapeStudio that opens the file.

New Board

Start from five stock templates (shortboard, fish, funboard, two longboards) on real Shape3D-format data, or custom dimensions with constant proportions, symmetric nose/tail or side options, and stringer-vs-straight-line measurement.

Twin-tips & asymmetrics

Mirrored twin-point editing with a lock badge; independent left/right outlines with a side indicator.

Units, honestly

cm, mm, inches and fractional inches at 0.1–1/16 precision, with length measured straight-line or along the developed stringer.

Autosave & crash recovery

Background recovery writes and a Recovery dialog that lands you on the Welcome screen with your board intact — not on a support page.

18/the_workspace

A workspace built like a tool

Fast, dense, keyboard-first — and readable at the end of a shaping day.

Modes on hotkeys

Design, 3D, Plan, CNC, Fin Design and HWS — one keystroke each (⌘1/2/3… plus ⌘5 and ⌘8), with the mode toolbar always in reach.

Command palette

“Search functions…” — fuzzy keyword matching over every command, tagged by category. ⌘K.

The status bar

Cursor X/Y, live width, thickness and concave-or-vee depth at the cursor, selection summary, context hints, live volume and a dirty dot — the instrument cluster.

Floating tool windows

Any right-bar panel can detach into its own draggable window; popups and production panels move where you want them.

Preferences

Six tabs: appearance themes (Void Dark, Arctic Light, Figma Light, Blueprint, Cyberpunk) with accent colors and font size; shaper identity; factory branding; per-setup fin defaults for nine layouts; the AI assistant; and updates.

The in-app manual

Full, searchable and illustrated — every function on this page documented in the app it describes.

Offline licensing

Signed keys validated locally — no internet connection required to run what you own.

Download

Free to start. Shape tonight.

ShapeStudio Light is the one public download — the full design studio, free forever: no key, no account, boards never expire. Buy Design or Pro above and your license key plus a private download link for that edition arrive by email.

latest · v0.8.0

ShapeStudio Light

free · design studio

No key needed — free forever. Need exports or CNC? Buy Design or Pro above — your license key and private download link arrive by email.

Release notes & every past Light build on GitHub releases — no telemetry, no account, your boards stay yours.